Since the introduction of we have used several approved GPS-Devices, in recent years we switched over to Doppler supported devices, first introduced with the GT-11 and later the GT-31.  Sadly the production of the GT-31 has reached the “End of Life” status,so it's no longer available.

The second track that we working on is the use of other GPS Devices, most import device that will be on the market is the Locosys GW-60. This device already has been approved and we are very happy that Locosys again produces a custom products with special firmware on it out of the box. You can buy the device right here at the webshop of ->

Besides that we have worked on standard devices, we realize that this standard devices will never reach the high-end specifications of Doppler GPS, but for normal day-to-day use, and the average surf-sessions this devices could be a nice alternative for some windsurfers. We are exploring the possibilities of enhancing the software of “standard” GPS-Devices. Target is to reach the current standards of GPS logging at, so making it possible to measure at a 1 per second rate, and log the number of satellites.

In general we allow any GPS Devices that’s is capable of logging GPS Data with a sample rate of 1 per second and support the .GPX data format. Please notice that the use of .GPX format is not allowed for records, and is more suited for normal day-to-day surf sessions. The only fully approved format at this stage are the .SBN, .SBP & .UBX  format.

For speedfreaks that already own a Android phone a good alternative good be the App GPS Logit, , this App is still under development by Manfred Fuchs, and could be a good alternative for starting speedsurfers. The App produces doppler speeds, at the same quality level of the old GT-11 .

1. Setting up the (B)GT-31

Make sure that your device has the right SD-card (maximum size 2 GB) and the right firmware, the following firmware versions are recommended:

  • V1.2 B1405a (official WGPSSRC allowed firmware)
  • V1.3 1123
  • V1.4 B0803T (V1.4B0803T)

If not delivered with the correct version make sure you have the correct firmware & settings installed, see the website of Tom Chalko for detailed instructions ->

IMPORTANT NOTE: The (B)-GT31 is not fully waterproof, so you need to use a Aquapack, Boxit or Equivalent.

2. Setting  up a general GPS Device for

  • Make sure that the devices supports a 1 per second GPS Frequency Rate and store the data in .GPX format.
  • Export your session to .GPX format,  please follow instructions by your own manufacturer
  • Import your .GPX file in with our auto-upload feature, you can find this in the “My GPS” Section